你好。
Hello.

在本教程中，我们将学习基本的 MOT 指令。
In this tutorial, we will learn basically MOT instructions.

首先，想象一下您想要移动或想要将一个数据传输到另一种方式或另一个位置的 TLC 程序。
Firstly, imagine into your TLC program you want to move or you want to transfer one data to another way or another position.

我们怎样才能做到这一点？
And how can we do this?

首先我们把D0这样的数据存入D0。
Firstly, we have a data like D0 into the D0.

我们有五个，我想将这个投资组合转化为数据，然后我们需要更多的指导。
We have five and I want to transfer this portfolio into data, then we need more instruction.

首先，我将让他们听听我的条件，它们为零，我将从移动移动零开始，例如移动三到 D0 或 LDA。
And first of all, I will let hear my condition with them zero and I will start with the move move move zero, move, for example, three to D0 or LDA.

同样，我可以继续我的条件，使用垂直线。
Again, I can just continue with my condition, with the vertical line.

例如，我只想移动整个 DB，例如 4 个，还有 LDA 和我们需要的 1 个。
I just want to move, for example, the total DB, for example, four and also LDA and one we need.

这是 16 位移动指令，我可以在这里对 F 使用双倍以上的六位。
This is 16 bit moving instruction and I can use double more than the six to the F in here.

两者将转为默认，但在双动部分，697将移至899。
The two will be transferred to default, but in double moving section, the 697 will be moved to the 899.

好的，这只是基本的演示说明。
OK, and this is just the basic demo instruction.

然后我们需要做的就是转换我的项目。
And then what we need to do just convert my project.

之后，我们会看看它是否运行正确？
And after that, we will see, is it running correctly or not?

正如您所看到的，没有错误。
There is no error, as you can see it.

它现在正在写信给 KLC，我将关闭它，我们将看看我是否会这样做。
It is writing to the KLC now and I will close it and we will see if I.

现在您将看到移动部分没有运行，因为没有条件，没有功率流到右侧。
Now you will see moving section is not running because there is no condition, there is no power flow to the right side.

所以首先，我将激活我的 M0，然后我将激活并激活第一个条件。
So first of all, I will activate my M0 and then I will activate and one first condition is activated.

然后你会看到三正在向零移动，然后这个零体积现在是三。
Then you will see three is moving to the zero, then this zero volume now three.

例如，这改变了两者。
And this change the two, for example.

进入这里，比如 10，好的，10 正在移动到这里，因为我们有一个条件。
Into here, like 10, OK, 10 is moving to here because we have a condition.

让我们把它关掉吧。
Let's make it off.

此时，好的，现在我们可以将图瓦卢更改为例如 15。
At this point, OK, and now we can change the Tuvalu to, for example, 15.

现在你会看到它没有动。
Now you will see it is not moving.

只是我将它们激活为零。
Just I will activate them zero.

然后就更OK了，这就是我们如何将它移到这里的另一件事上，例如，进入Let's make it on，让我们在第二天完成我们今天可以写的内容。
Then it is more OK, this is how can we move it to another thing here, for example, into Let's make it on and let's make it on day two what we can write today.

二。
Two.

如果我能。
If I can.

例如，如果我写。
If I write, for example.

五十万。
Five hundred thousand.

你会看到它不允许，因为这是一个大于 16 位的想法，如果我写给你 20000，好吧，它是允许的。
You will see it is not allowing because of what because of this is a bigger than 16bit thought that if I write you 20000, OK, it is allowing.

正如你所记得的，也许吧。
And as you remember, maybe.

我会再次去程序员计算器。
I will go to calculator again for programmer.

让我看一下这里的一件事，如果不是站点数据，则 16 位数据的指数最大。
Just let me take a look once to one thing here to exponential by 16 bit data is maximum if it is not site data.

如果我们需要使用科学数据，如果它不仅仅是没有正弦正负的普通数据，我们可以使用这是我的最大数字。
If it is science data we need to use, we can use just this is my maximum number if it is not just normal data without sine plus or minus.

我们可以使用这个作为最大值。
We can use this one as maximum.

好的？
Okay?

因此，我们可以在这里使用电影指令，仅传输 16 位数据。
Because of that, we can right here with the movie instruction, just 16 bit data transferring.

没关系，但是有了双倍，现在会发生什么？
That's OK, but with the double, what will happen now?

让我们先看一次，我讨厌听到如果我在这里写五十万，你会发现我们可以写你的五十万。
Let's take a look once before I hate to hear if I write here five hundred thousand, you will see we can write your five hundred thousand.

我们可以编写更多的数据。
What we can write is much more data.

我们去这里吧。
Let's go here.

好的。
OK.

以及 2 的指数乘以 32。
And two exponential by 32.

然后再次。
And again.

这是正确的，但我表达了单击“加号”按钮，因此如果我使用签名数据加上或减去除以二的任务，这就是我的最大数据。
That was correct, but I expressed the click to Plus button, so this is my maximum data if I working with the signed data plus or minus the task divided by two.

这一点，我的女儿，这就是真棒移动和双移动选择之间的区别。
This one, my daughter, that this is the difference between awesome move and double moving selection.

这是一个额外的故事。
It's an extra story.

我们只会展示我只会展示两个不同的指令，我们会的。
We will just show I will just show up to two different instruction and we will.

完全理解我们如何移动数据以及 16 位和 32 位数据？
Completely understand how can we move data and 16 bit also 32 bit data?

或者我们如何转移、广告、屏蔽或者我们如何填补搬家？
Or how can we transfer, advertise, block or how can we fill the move?

用相同的数字填充数据集并完全确定，我们下一个教程见。
Filling the dataset with the same number and exact OK, see you in next tutorials.